Just getting started and need a little help - by: CapnRon

Hi all,
I am just getting started with Kstars/EKOS. I downloaded the programs yesterday, but I have made good progress with some remaining issues. I am running the INDI Server on a 32 bit windows laptop at the telescope (My gear is: Celestron CGEM mount, several telescopes, SBIG 8300M main camera, SX filter wheel, OAG with an SX Lodestar as my guide camera and the equipment is all working locally). On the server I connect to the mount, the SX CCD and SX Filter wheel using ASCOM drivers (but not the SBIG camera). I am running KSTARTS/EKOS on a 64 bit remote machine in the house connecting over my private wireless network. I have set the address and ports so that the two programs talk to each other. I have a profile, in Ekos, which includes the mount, an SBIG CCD, an SX CCD guider and the SC Filter Wheel. I can connect to these devices in EKOS except for the SBIG CCD. I tried a new profile which only has the SBIG CCD in EKOS and no devices on INDI Server, but I was still unable to establish the remote device: SBIG CCD.

Can someone help point me in the right direction to try and get the SBIG camera working?

thanks,
Ron