Hey,
I'm having problems with my ASI 120MC. It connects just fine and the client is receiving everything fine. But when I try to make an exposure, doesn't matter how long, it fails to get the image from the camera. It also seems to have problems setting the CONTROL parameter like Gain and so on.
My INDI version is 1.3.1+r2850~201702231016~ubuntu16.04.1. The version of the asi driver is 0.5+r2850~201702221347~ubuntu16.04.1. The cam itself is about 3 years old, it worked already sometime last year in autumn.
And here goes the log-file. In sec 42 I started an 1 seconds exposure, it obviously failed and later on, in seconds 112 I tried to change BandWidth and later Gain, it both failed.
The error code 16 sttands for ''ASI_ERROR_GENERAL_ERROR//general error, eg: value is out of valid range'', but I've no idea how the values could have been out of range since i set them via the Kstars slide interface and that does not allow to set values out of range...
Anybody any ideas? Thanks in advance!
Erik
I'm having problems with my ASI 120MC. It connects just fine and the client is receiving everything fine. But when I try to make an exposure, doesn't matter how long, it fails to get the image from the camera. It also seems to have problems setting the CONTROL parameter like Gain and so on.
My INDI version is 1.3.1+r2850~201702231016~ubuntu16.04.1. The version of the asi driver is 0.5+r2850~201702221347~ubuntu16.04.1. The cam itself is about 3 years old, it worked already sometime last year in autumn.
And here goes the log-file. In sec 42 I started an 1 seconds exposure, it obviously failed and later on, in seconds 112 I tried to change BandWidth and later Gain, it both failed.
The error code 16 sttands for ''ASI_ERROR_GENERAL_ERROR//general error, eg: value is out of valid range'', but I've no idea how the values could have been out of range since i set them via the Kstars slide interface and that does not allow to set values out of range...
Anybody any ideas? Thanks in advance!
Erik