I have a Raspberry PI 3 running as server- updated religiously, connected by wireless or LAN (used both)
I use either a laptop or desktop with KStars.
The Canon 6D connects, shutter works, but each capture fails during a first attempt- sometimes even during a second or third.
I have tried 1.0s, 5.0s, 10.0s, 60.0s, and 420.0s exposures, as well as a combination of delays up to 60s. The issue persists. I have perused the forums here in search of a solution, and cannot find much. Will uploading logs be different between using the Pi locally versus using a client like my desktop or laptop?
This is my first post, but judging from some of the errors I've run into, I will be posting often. Very impressed by EKOS, KStars, and INDI- only frustrated by these issues and eager to solve them.
Best,
Jacob Nowatzke
From 5s exposure flow; the first 5s capture (or 420s- whichever length of exposure is set) finishes, but then is restarted after failure.
I use either a laptop or desktop with KStars.
The Canon 6D connects, shutter works, but each capture fails during a first attempt- sometimes even during a second or third.
I have tried 1.0s, 5.0s, 10.0s, 60.0s, and 420.0s exposures, as well as a combination of delays up to 60s. The issue persists. I have perused the forums here in search of a solution, and cannot find much. Will uploading logs be different between using the Pi locally versus using a client like my desktop or laptop?
This is my first post, but judging from some of the errors I've run into, I will be posting often. Very impressed by EKOS, KStars, and INDI- only frustrated by these issues and eager to solve them.
Best,
Jacob Nowatzke
From 5s exposure flow; the first 5s capture (or 420s- whichever length of exposure is set) finishes, but then is restarted after failure.