Hi,
recently I installed INDI on a Rock64 single board computer. I can control my mount (AZ EQ6, EQMOD mount) and camera (ZWO ASI 174MM-Cool) without problems. But I can't get the ZWO filter wheel to work.
The setup:
INDI on Rock64 with ZWO camera and ZWO filter wheel connected (both show up in the usb list)
Ekos/Kstars on a windows laptop connecting to the Rock via PuTTy (SSH).
Starting indiserver through the web manager or directly (both methods give the same result).
It seems to start up in the server. But Ekos/Kstars can't connect to it. On start up, the connection indicator (red, yellow, green) stays yellow and is unresponsive.
I've tried changing the asi.rules file, but no luck. I've tried with and without powered usb hub without success. I tried with the wheel connected to the camera. Neither usb3 nor usb2 work.
The wheel works fine when I switch to a Raspberry pi with the same setup (Ubuntu Mate, INDI full, Ekos/Kstars bleeding)
I've tried everything in this thread without success:
indilib.org/forum/focusers-filter-wheels...-wheel.html?start=60
This is displayed on the ssh screen when I start the indi server (with only the efw attached)
rock64@rock64:~$ indiserver -v indi_asi_wheel
2017-11-02T22:51:03: startup: indiserver -v indi_asi_wheel
2017-11-02T22:51:03: Driver indi_asi_wheel: pid=2460 rfd=3 wfd=6 efd=7
2017-11-02T22:51:03: listening to port 7624 on fd 4
The Ekos log is attached
Any help would be appreciated.
recently I installed INDI on a Rock64 single board computer. I can control my mount (AZ EQ6, EQMOD mount) and camera (ZWO ASI 174MM-Cool) without problems. But I can't get the ZWO filter wheel to work.
The setup:
INDI on Rock64 with ZWO camera and ZWO filter wheel connected (both show up in the usb list)
Ekos/Kstars on a windows laptop connecting to the Rock via PuTTy (SSH).
Starting indiserver through the web manager or directly (both methods give the same result).
It seems to start up in the server. But Ekos/Kstars can't connect to it. On start up, the connection indicator (red, yellow, green) stays yellow and is unresponsive.
I've tried changing the asi.rules file, but no luck. I've tried with and without powered usb hub without success. I tried with the wheel connected to the camera. Neither usb3 nor usb2 work.
The wheel works fine when I switch to a Raspberry pi with the same setup (Ubuntu Mate, INDI full, Ekos/Kstars bleeding)
I've tried everything in this thread without success:
indilib.org/forum/focusers-filter-wheels...-wheel.html?start=60
This is displayed on the ssh screen when I start the indi server (with only the efw attached)
rock64@rock64:~$ indiserver -v indi_asi_wheel
2017-11-02T22:51:03: startup: indiserver -v indi_asi_wheel
2017-11-02T22:51:03: Driver indi_asi_wheel: pid=2460 rfd=3 wfd=6 efd=7
2017-11-02T22:51:03: listening to port 7624 on fd 4
The Ekos log is attached
Any help would be appreciated.