Having issues with the Moonlite Focuser on one MacBook Pro and iEQ 45 Pro Driver on another MacBook Pro. The Moonlite focuser Indi log constantly gave me two errors over and over. One was for the Temperature Update and one was for the Position Update. These weren't the only two but they were to two constant ones. The focuser was barley responsive. It only seemed to move every other 5 sec. or so or whenever it wanted to. So I tried another MacBook Pro and it seemed to work without any errors or issues but then after about 1 hour the mount driver (iEQ45 Pro) kept failing. Ekos thought the mount quite tracking but the mount controller confirm that it was in fact tracking but Ekos wasn't able to move the mount except for a few fractions of a second. I only have the log for the Moonlite issue, sorry. But I suspect the issue is similar for both problems perhaps.
its a Moonlite high-res stepper motor with the mini controller V2. Never had an issue with the mount driver ever before but for some reason last night was the night for issues. Any help or ideas is appreciated. I've tried changing USB cables, plugging directly into the computer from the focuser controller, changing USB hubs. Reinstalling Ekos/Kstars. Any help or ideas are appreciated! - Wesley
its a Moonlite high-res stepper motor with the mini controller V2. Never had an issue with the mount driver ever before but for some reason last night was the night for issues. Any help or ideas is appreciated. I've tried changing USB cables, plugging directly into the computer from the focuser controller, changing USB hubs. Reinstalling Ekos/Kstars. Any help or ideas are appreciated! - Wesley