MacOS 10.10. Indi Server and Indi Control Panel from CloudMakers.
From Indi Control Panel connection via cu.usbserial is successful and IEQ45 mount coordinates are correctly reported. They change when the mount is driven from the hand box. Slew is selected. When new coordinates are entered (that are above the horizon) the mount slews to RA and Dec of 00:00:00 no mater what was entered.
From the command line: execute indiserver for this mount. Select port (ttyUSB0) and connect using indi_setprop. Use indi_getprop -v and current coordinates are shown just like from the INDI Control Panel. When new coordinates are entered the mount slews to 00:00:00 in both RA and Dec no matter what coordinates were entered.
Ubuntu 14.10. Apt-get of nidi-full and indi kstars bleeding.
From KStars Tools->Devices connection to the mount was successful. As above coordinates were correctly shown and changed with manual hand box control. Attempting to drive to any coordinates sent the mount to 00:00:00.
Any clues?
From Indi Control Panel connection via cu.usbserial is successful and IEQ45 mount coordinates are correctly reported. They change when the mount is driven from the hand box. Slew is selected. When new coordinates are entered (that are above the horizon) the mount slews to RA and Dec of 00:00:00 no mater what was entered.
From the command line: execute indiserver for this mount. Select port (ttyUSB0) and connect using indi_setprop. Use indi_getprop -v and current coordinates are shown just like from the INDI Control Panel. When new coordinates are entered the mount slews to 00:00:00 in both RA and Dec no matter what coordinates were entered.
Ubuntu 14.10. Apt-get of nidi-full and indi kstars bleeding.
From KStars Tools->Devices connection to the mount was successful. As above coordinates were correctly shown and changed with manual hand box control. Attempting to drive to any coordinates sent the mount to 00:00:00.
Any clues?