I'm using Atik Titan (color) on Raspberry Pi and observing strange behavior.
For all exposures =< 0.5s everything is just fine.
For all exposures >0.51s I get horizontal bar at the top/bottom of the image
Pictures of exposure 0.5s and 0.51s are attached to the post.
Do you recognize this type of noise/distortion? Where does it come from?
Platform: armhf / raspberry pi
OS: raspbian jessie (debian 8 )
indi server: 1.0
Atik drivers: 0.25
Other: Atik Titan connected to raspberry pi through an active (powered) usb hub, both powered from the same power outlet
For all exposures =< 0.5s everything is just fine.
For all exposures >0.51s I get horizontal bar at the top/bottom of the image
Pictures of exposure 0.5s and 0.51s are attached to the post.
Do you recognize this type of noise/distortion? Where does it come from?
Platform: armhf / raspberry pi
OS: raspbian jessie (debian 8 )
indi server: 1.0
Atik drivers: 0.25
Other: Atik Titan connected to raspberry pi through an active (powered) usb hub, both powered from the same power outlet