CCD Camera Qsi - by: joe90
Qsi filter wheel, after doing a upgrade unable to add a name to individual filter. Qsi CCD device crashes. Iam running 16.04 also tested on 17.04 does the same. The version of the Qsi ccd device is...
View ArticleClik here to view.
Changing the Binning in Evia image sequence vs straight capture - by: cduston
Hello all, I'm getting some behavior which I didn't expect when changing the binning on my SBIG ST-402. When I change the binning via Capture (taking a single image), the resulting image is a different...
View ArticleMosaic job creator handles negative rotations as positive - by: astro_g
Hi. I may be wrong here, but if you introduce a negative angle in the Mosaic job creator UI, in the "rotation" field under "1. Equipment", it is handled as positive, i. e. -33 is handled as +33. The...
View ArticlePolar Align Workflow? - by: kbahey
On the last clear night, I tried Polar Align Assist twice, but had two different and strange outcomes. On the first try, PAA completed, then displayed the overlay with the grid, but the magenta colored...
View ArticleRobofocus Devices - by: joe90
Robofocus not doing steps when pressing focus out or in, in Ubunto mate 16.04. Works perfectly in Ubuntu 16.04 and 17.04.
View ArticleINDI and VLBI - by: Platone
It would be a really nice thing to join a social-driven or open network about VLBI (Very long baseline interferometry). Since there is much difficulty to get different and far devices time synced, I...
View ArticleLibIndi error compile with RaspBerry PI3 - by: pcxz
Compile last libindi with raspberry pi3 not complete, error is: Bye.
View ArticleHow to debug mount not responding to commands? - by: kbahey
How does one go about troubleshooting or debugging a problem when the mount becomes unresponsive for no apparent reason: Here is an example. Commands are issued, and there is a response, then suddenly,...
View Article[SOLVED] LibIndi error compile with RaspBerry PI3 - by: pcxz
Compile last libindi with raspberry pi3 not complete, error is: Bye.
View ArticleMount TrackXXX properties - by: knro
Moving this discussion from emails to this thread. TrackMode & TrackState are now implemented in INDI::Telescope in Github libindi-tracking branch. IEQ driver migrated, and currently working on...
View Article[SOLVED] PA, when auto and west selected, 2nd rotation is east - by: astro_g
Hi. In the Polar Alignment Assistant (beta), if "auto" and "west" are selected, 2nd rotation is east insted. To reproduce: 1.- Start ekos. Telescope and CCD simulators are ok (plus GSC). Go to PA...
View Articleauto switch to client mode for preview - by: xsnrg
Situation: I am always connected remotely to my telescope's INDI machine. When I capture, I set the capture sequence to "local" to write to the SSD on the INDI machine attached to the scope and camera....
View ArticleEQMod storing config values for sync/align/horizon.. tabs - by: fm
Hello, its all in the title, I must be missing something obvious, sorry but I cant find an answer (setup is a raspi running eqmod, client is laptop connecting to it) : how (or where ) to strore these...
View ArticleCanon 450D Indi configuration - by: rmor51
Hi everybody, I use Kstars-Ekos under Ubuntu-Mate 16.04.2LTS. I can't keep the configuration of the Canon image: Width, Height, pixel size, etc, within the Image Info tab and Image setting tab. Fields...
View Articleqhy5 and qhy6 problems - by: Egroj
Hi! I'm new using INDI. I am trying to connnect ekos to my qhy5 or qhy6 cameras, just to start using INDI, but it says "Kstars detected INDI driver indi_qhy_ccd crashed. Please, check INDI log in the...
View Articleindi_canon_ccd segfault - by: noriQ
Hi. I ran Ubuntu on Intel Stick PC and installed INDI server and Kstars. However, indi_canon_ccd crashes with a segmentation fault. The environment and INDI log are as follows: system environment:...
View ArticleClik here to view.
eqmod pierside management - by: fm
I have a custom MC (aiming at being) eqmod-compatible. I am -mostly- completely lost in the tabs of the driver, confused with 2 align tabs, unable to understand the logic of parking, nor the management...
View ArticleWriting my first INDI (Focuser) driver - by: kbrown
Hi, I have just started learning how to write INDI drivers and have a somewhat working version for my arduino based DIY focuser but I have a few questions: The focuser can be controlled with a hand...
View ArticleClik here to view.
Seeking mount controller for servo motors - by: MiHell
Does anyone know of an INDI compatible servo controller for a heavy duty mount (> 100kg optical load)? Until recently the mount of our public observatory has been driven by 4A stepper motors and a...
View ArticleNew version of INDI Web Manager - by: juanmb
I am new in the INDI community, so hi everybody! I just made a bunch of improvements to the indiwebmanager project that Jasem kindly merged into his Github repository. Some of the changes are:...
View Article