using dome scripting gateway - by: ttf
Hi! I'm currently trying to use indi_script_dome to control the opening roof of my observatory box, but there is not much information on how to properly use it. there is a problem with the status.py...
View ArticleList of supported cameras - by: seeker052
Is there a list of supported cameras, I was unable to find one. Thanks,
View ArticleEQMOD tracking mode sidereal + PEC. - by: wimvb
As far as I understand the eqmod driver doesn't yet support sidereal + PEC tracking. Irrespective of whether PEC is permanent or software based, it would be nice to have this feature. The driver is...
View ArticleQuestion about setting FRAME - by: mworion
Hi, still struggling about an issue with my INDI Client setting a subframe for doing image. If I do send tot set the values, I run into troubles. I watched the XML send to INDI server (EKOS on MAC):...
View Articleproblem with SXVR M25c camera, cant find log file to send - by: AstroBitz
every time I start the camera and it starts to cool, it just looses connection and temp shows -273.00 and have to disconnect and try again and it just crashes every time, have debug enables but where...
View ArticleSolver and Synchronization Issues - by: El Corazon
I have searched the Forum for Solver and Sync issues and have seen that others have similar issues as I do, but I have not found a definitive solution. If I have overlooked it, perhaps someone can...
View ArticleSX imaging camera and Lodestar guide camera - by: AstroBitz
I have an SXVR M25c imaging camera and a Lodestar guide camera, now in INDI I have chosen the correct driver for my imaging camera, but can’t sort out correct guide camera driver, now my SXVR M25...
View ArticleClik here to view.
What is causing this..? - by: AstroBitz
What is causing my images to show like this... ignore the white spots that are not stats as this was a test with lens cap on, but all images only show half the picture..
View ArticleDriver updates, why the frequency? - by: supernov
Just out of pure interest and because some drivers have been behaving badly recently, why are the Indi drivers actually updated so often? I understand this to be the case for Ekos and Kstars, but most...
View Articlekstars and astrometry on mac - by: jrf
I am trying to get all my resources on a pi (success) and on my mac as well. All of the features work except astrometry. i keep getting an error about the location of files, but cannot seem to find...
View Articlemove away from gentoo on raspberry? - by: pauledd
Hi there Sorry this might be a bit off topic. I noticed there are a few gentoo on RaspberryPi users here, including me. I really love gentoo and its endless possibilities to configure it in every...
View ArticleEQMOD questions - by: ElevatedG
I'm fairly new to AP and INDI as well with just a few questions... How does PEC training in EQMOD work? I've tried to enable training but without any result. Also, will it help smooth out guiding?...
View ArticleAnybody use an SX imaging camera successfully with Ekos..?? - by: AstroBitz
I have an SXVR M 25c and it does not work with Ekos, after a good few hours spent trying and with help from Jasem the camera will not function correctly, so just wanted to hear from any users that...
View ArticleOSX issue with GSC - by: kyuzumaki
I cant seem to get this working. I've used the RPI instructions compiled gsc, moved the files around as the guide says set up the GSCDAT path. The path shows up when I query with printev. When I open...
View ArticleDoes anybody use an SX imaging camera with Ekos...?? - by: AstroBitz
I have an SXVR M 25c and it does not work with Ekos, after a good few hours spent trying and with help from Jasem the camera will not function correctly, so just wanted to hear from any users that...
View ArticleUnable to zoom-in (above 100%) in the focusing module? - by: sywong2000
Hi, I'm using Kstars 2.9.1 in Raspbian. I've found that in the focusing module, I cannot zoom-in above 100%. e.g. I can't do 120% or 150% in the framing setup. Is this normal? Plus I use a Bahtinov...
View ArticleINDI Server for windows and DSLRs - by: rlancaste
So i have a friend who wants to use KStars on his windows machine with a canon DSLR. Of course for me on the raspberry pi or on my mac there would be the indi gphoto ccd driver which is what I use, but...
View ArticleKStars Lite 4.0 does not start - by: VTVL
I have not used KStars Lite for about a year. It previously worked OK with my LX90 and RPI3. Recently I added more SD memory to my Android phone (Android 6.0) The increased memory was set (formated) to...
View ArticleClik here to view.
SXVR M25c camera still not working correctly, see image.... - by: AstroNerd
So after many hours trying to get my SXVR M25c camera to work correctly with my rpi3 still no joy, so took the steps to put Linux on my desktop PC on a dual boot with win 10, this machine is fast and...
View ArticleDevice drivers/packages and install instructions - by: Pixels
Hello all, I have INDI, Kstars, and Ekos installed on a RPI-3 board with my WiFi hotspot and Real VNC running and at this point I am trying to get my observatory equipment setup. In Ekos I am looking...
View Article