simulator gives no image after 2.9.5 - by: ed.defesche
Hello, I'm having problems taking an image in the simulator because I would like to do more tests with offline platesolve. I used the same settings from a profile I used in the previous version that...
View ArticleField rotation in simulator - by: klaus
I'm on KStars 2.9.5 facing a 90 degree left rotation when taking an image. I didn't find a way to prevent this rotation. Can someone confirm this behaviour? Is it a bug or simply user stupidity? CA Klaus
View Articleastro-smart products with INDI? - by: xsnrg
Hello all, I have an astro-smart dew heater controller with SQM that I would like to use with INDI/Ekos. There is no support for it, that I am aware of, but I was curious if anyone has played with one?...
View ArticleFirst time w/ Ekos and Indi (guiding problem) - by: AstroGabe
I'm coming from SGP on a PC stick to try out Ekos and Indi. I love the idea of the Indi platform and wanted to take another shot at it - I had tried some years ago, but went ahead w/ SGP. I'm much more...
View ArticleSetup for online astrometry in Ekos? - by: jrf
Friends: I am having some luck with astrometry. I would like to try to use the online astrometry.net for some testing, however. But I am not sure how to set it up. I have an api key from...
View ArticleQHY driver crash on start - by: starrybird
Recently I tested my QHY178MM with the latest indi-qhy driver, the driver crashed immediately on startup. Checking the output, it looks like something went wrong in the libqhyccd.so. Testing with 2...
View ArticleCannot take exposure while recording/streaming is active. - by: ollie
I have tried both the PPA and nightly build versions and am getting this error when trying to take an exposure: Cannot take exposure while recording/streaming is active. I verified that I that...
View ArticleQHY5 “exposure timeout error” message after first loop stopped - by: AstroWill
Hi, I have a recurring error with my QHY5 showing “exposure timeout error” message when the guide camera fails to loop. It will continue exposure on first loop. But once started, and stopped, any loop...
View ArticleRazberryPI ZWay roll off roof driver - by: FraGro
Hello, my name is Frank and I'm new here. I like to write a indi driver for my observatory roof using a Raspberry PI with the Razberry Z-Wave Module which has an Restful API. I use two Z-Wave door...
View ArticleAP experimental - by: manu
Hi, My name is Emmanuel and I am new on this forum. While setting up my installation, I've encountered a problem with the park position 3 and the experimental AP driver. When using the park position 3,...
View Articlestreaming: New exposure in the streaming tab gives wrong fps - by: seescho
Second try to post (the firstone didn't appear on indi-forum) I'm just playing with the new exposure slider in the streaming tab of the indi control panel. Stream on: Setting exposure to 1s: 1 fps...
View ArticleClik here to view.
Mount Debugging - by: fewayne
Yes, I have engaged in an expedition to scale Mount Debugging almost every time I visit ProgrammerLand. I am trying to better polar-align my iOptron CEM25P. I have been using the Polar Alignment...
View ArticleAlign tab doesn't compute FOV anymore - by: wvreeven
Recently I noticed, when I use my Canon DSLR and primary scope, that Ekos doesn't display the FOV in the Align tab anymore. This means I have to take an additional pic to get the FOV and this sometimes...
View ArticleCanon 20D - indi/ekos - capture on RAM/SD & auto delete options - by: paskeyes
Dear All, I was trying to install my pi3 box for astro with a 5D3 prior to switch to an old 20D due to some issues on the 5D3 (other topic open on gphoto2 GIT), anyway : On the indi control panel now...
View ArticleAdd J2000 coordinate supoort in Ekos and INDI - by: starrybird
From this topic I knew that both KStars and INDI use JNOW coordinate. However, many catalogs and online databases provide J2000 coordinate of an object. The only place I can use J2000 coordinate is in...
View ArticleDisplay of supernovae and novae - by: wvreeven
KStars already can display supernovae. However, when it does, it shows all supernovae at maximum brightness. It would be very useful if KStars were able to show supernovae at their current brightness....
View ArticleSetting dome parameters - by: JCJ
I have been looking for a way to determine two dome parameters. 1/ How to perform an autocalibrate (number of ticks per turn) using the MaxDome II driver ? 2/ How to set the park azimuth if we want it...
View Article3653 bits rather than 4096 in fits images? - by: mlarsson
Hi! I'm trying to take flats with a Canon EOS 1000D through Ekos/INDI. Image settings is to use fits, not compressed, download to my client. The setup is a R-Pi by the mount and a laptop indoors....
View ArticleKStars_Indi_Fitsviewer could not get /tmp/file - by: Raven_MG
Hello, this is my first time here! I like the INDI Tools with KStars. Good work! I have the following problem when trying to get a preview with my ASI120MM -> KStars - EKOS - CCD - Preview i could...
View Article