guide star lost after dither - by: alacant
Hi everyone I'm seeing frequent loss of guiding after a dither. The requested dither is only 3px but the dither itself is much larger than that; the mount seems to be hit far harder than is necessary...
View ArticleFailure to connect to QSI camera after build - by: phomer60
I completed a bulld on my Raspberry Pi 3 running Raspbian today and now File Attachment:File Name: log_19-11-42.txtFile Size: 27 KB the software fails to connect to my QSI 583 camera. It was working...
View ArticleindiWebmanager RESTful API | Start Server - by: Gonzothegreat
I see in the gitHub github.com/knro/indiwebmanager that the Start Server is in TODO state, any plans in implementing it?
View ArticlePort failure Error: Inappropriate ioctl for device. - by: Gonzothegreat
I have been using the following udev rule for a while now, working great until very recently. It does create /dev/Mount as expected. My EQmod is set to connect to that device, so far so good until...
View ArticleindiWebmanager: restart one driver only - by: pcxz
In some cases i have necessity to stop my canon camera ( for cleaning sensor from dusty ). I use indiwebmanager in remote to rpi3, is possible stop and start only indi_canon_ccd driver? Thanks.
View Articlescheduler does not start? - by: RogueSquadron
Now that I am back from vacation I wanted to try the scheduler with KStars 2.9.7 for the first time. I started the scheduled job after the planned start time, but the scheduler did not start the job,...
View ArticleAutomating capture of fast-moving objects - by: TallFurryMan
Make the Scheduler aware of the type of object it is attempting to capture, and in the case of a comet, asteroid, satellite, etc, have its procedure periodically realign the mount when the coordinates...
View ArticleAutomatic Exposure calculation for Flats is faulty - by: RogueSquadron
I was trying to take Flats with target ADU of 50 (8 bit per pixel) and tolerance 1. The calculation started correctly and reduces the exposure times, but then it starts jumping around, please see...
View Article4100 index (TYCHO - 2) importance in solver - by: T-Studio
4100 index (TYCHO - 2) importance in solver I used RaspberryPi 3, Ekos Solver, but I only used index file 4200 ~. As a result, many errors occurred and it took time to solve. Normally, Pi will be used...
View ArticleDirectly enter target coordinates for "capture and slew"? - by: fewayne
Hey all, In the Alignment module, the "capture and slew" option refers to "target coordinates". Can I enter those directly somewhere, without having to go through creating a sequence in Capture and a...
View Articlelibindidriver.so issue on RPi3 - by: kengs
I'm working on the Avalon driver and it works fine on x64 and x86 but I'm having a problem on ARM. The driver fails in a call to get_local_sidereal_time which is defined in indicom.c. It is in library...
View Articlescheduler: start capture after guiding has settled - by: alacant
Hi everyone I'm using PHD2 PPEC for guiding and would like to let the guiding run for a while so that it can establish it's database for corrections. Without the scheduler, I can manually begin the...
View ArticleEasy Backup/Restore of KStars/INDI - by: muckmuck
It would be nice to have a Backup/Restore module in KStars that could be used to backup all KStars/INDI settings, Add-on's(images/catalogs), profiles, astrometry.net files, darks, etc.
View ArticleClik here to view.
FITS viewer shows green image? - by: mlarsson
Hi! After a few months away from astro stuff (moving to a new house), I now have unpacked and have enverything up and running again. And I ran into something that for me is new: on and off, the...
View Articleekoslive and vnc - by: alacant
Hi everyone I'm currently using VNC to control my ekos ap sessions; laptop at computer running vnc server and an android tablet as client. Questions: 1. Is that what ekoslive does but without vnc? 2....
View ArticleSetting resolution via config.txt for tablet - by: kookoo_gr
I am connecting to my astropi with my samsung galaxy tab e 9.6 via vnc and the resolution is set to 656x416 and i am trying to increase it to 1280x800 via the config.txt file at the sd card with no...
View ArticleClik here to view.
Fedora 28 - Unable to get DSLR or ZWO working - both crash - by: stash
Hi, I am playing with Fedora-28 (x64) on an AMD 64bit desktop (8gb) (used this for ubuntu 16.04 Indi/Kstars no problem) for a future install onto a SCB (64bit) but I am having a problem getting Indi...
View ArticleClik here to view.
oh dear remote upgrade to 18.04 LTS gone bad... - by: Gonzothegreat
Well, the 18.04 LTS has been release for the Odroid C1, so guess what I've done.... that's right, I've upgraded... This time, the board has not come back online... I got my remote hands to shutdown the...
View ArticleVNC Resolution with AstroPi3 - by: Horus Astro
Hi, I have used rlancaste great AstroPi3 script to set a new RPi and its working fine using local HDMI, but using it headless with VNC Viewer I cannot seem to set the display resolution so I can see...
View Article"load and slew" failed - by: patdut
Hello, Yesterday the night was clear, so this was my 4th night of imaging in a week. As I was with some friends on the field doing shots and observing with our dobsons I did not try a complicated...
View Article