Alignment Data auto loaded? - by: pauledd
I did an alignment in kstars and I clicked on "write file" in the align section of EQmod. Then I close kstars When I start kstars again and connect eqmod it says: "2015-05-17T15:49:19: Align: current...
View ArticleQHY Driver problem wrong libqhy.so version - by: gduff
I installed the indi-full package under ubuntu 14.04 and whenever I start the QHY driver though "indiserver -v lib_qhy_ccd" I get the following messages: 2015-05-17T17:50:50: Driver indi_qhy_ccd:...
View ArticleKStars freezes at Save File dialog - by: klaus
After spending a complete sunday with bug tracking, I address my problem to you. KStars freezes whenever I open a file dialog, Open FITS ... , Save Sky Image... or Run Script.... I also tried EKOS VM...
View Article[SOLVED] unable to compile indi-duino - by: Gonzothegreat
I had today to rebuild my RPI which is running www.indilib.org/develop/arduino/meteostation.html I've followed the instructions from indiduino.wordpress.com/downloads/ to build it but it fails with: I...
View ArticleUse of PENTAX K-5 with KStars and EKOS - by: noste99
Hi, As PENTAX K-5 owner I would like to use this camera in the context of KStars and EKOS. Unfortunately, PENTAX K-5 is not covered by gphoto. Is there anyone out there who could give me some hints...
View Article[SOLVED] GPhoto - by: Docerland
Hi! Finally I got eqmod and my qhy5II-mono working installation from source code, clean install on a RPi2. The problem is I cant connect to my Canon 600D or NIKON D7000, not before and not now. When I...
View Article[SOLVED] Connecting to EQMOD mount crashes KSTARS on RPi2 - by: noste99
Hi, After having installed KStars on my brand new Raspberry Pi 2 Mod B I tried now to control my NEQ6-Pro mount with EQDir USB-2-Serial converter. KStars starts up fine. When launching the Telescope...
View ArticleQHY Driver problem wrong libqhy.so version - by: gduff
I installed the indi-full package under ubuntu 14.04 and whenever I start the QHY driver though "indiserver -v lib_qhy_ccd" I get the following messages: 2015-05-17T17:50:50: Driver indi_qhy_ccd:...
View ArticleBinning on CCD in python - by: skamby
Hi, I just recently discovered this gem of software, and got a raspberry pi running as an indi server for a starlight xpress camera. I am using the timelapse python script as a local client, and have...
View ArticleEkos, minumum exposure time - by: carlos
Hello, I'm trying to create a few bias frames, but encountering a problem with the CCD exposure setup. I'm using a Atik460 , which supports exposures down to 0.001. If I try to enter 0.001 , the ekos...
View ArticleAutoguiding with V4L2 CCD via ATIK CCD - by: Kaczorek
Is it possible to use V4L2 CCD device as a guiding cam and route guiding signal to a mount via ATIK CCD ST-4 port? ATIK CCD is used as a main imager CCD. I'm still waiting for clear skies to test it...
View ArticleNew INDI client CCDciel for astrophoto sessions - by: oleg
You can test a new INDI client CCDciel sourceforge.net/projects/ccdciel/ Description A CCD capture software intended for the amateur astronomer. It include all the features required to perform digital...
View ArticleINDI and Oculus and MAC oh my - by: rppass
I have an Oculus all sky camera. Have used INDI (libindi-1.0.0) to write a client for the camera on my Mac. I have run it using both the INDI server for Mac from Cloudmaker and the INDI server running...
View ArticleClik here to view.
Mobile astrophotography with RPi2 - by: gus_
These are the (minimum) steps I found to get kstars/ekos running on Raspberry Pi 2 and control everything with a mobile phone. It runs smoothly. I hope someone finds it useful: Download Ubuntu-Mate for...
View ArticleA Few bugs regarding SX Wheel and Cams - by: micks
So far: It looks like the INDI SX filter wheel won't take advantage of forwards and backwards movements. It will always turn clockwise even if the filter is directly behind the one we need: The...
View ArticleUser interface for INDI Eqmod telescope driver - by: oleg
You can test other new INDI client EqmodGui, which is the user interface for INDI Eqmod telescope driver. See its page sourceforge.net/projects/eqmodgui/files/ Description Eqmodgui is a user interface...
View ArticleWho uses the Lumenera Lu070M under Linux? - by: oleg
Who uses the Lumenera Lu070M under Linux?
View ArticleWhat is the best waqy to upgrade toKstars bleeding - by: bmorrelltx
I have a raspberry PI b+ with ubuntu-mate running. I want to install the latest indi drivers, I have tried using upgrading to the latest indi full lib and then kstars bleeding. This corupts the KStars...
View ArticleClik here to view.
2 webcameras issue - by: fliker09
I have a laptop with Kubuntu 14.10. I am using PPAs. As you might already know installing KStars-Bleeding is impossible on versions below 15.04. So I decided to use CCDCiel. But I have run into a...
View ArticleViewer stops when it gets an saturated image - by: starhopper
Hello Forum, I am new to the INDI Forum. I am trying and testing my hardware and will learn more about INDI, EKOS & Co. I am very common with astrophotography. I have connected my ASI120 as camera...
View Article