Recommendations for Speckle CCD Driver? - by: adinghi
Hi team, I have a need for a CCD driver which can capture a bunch of short exposures quickly -- about 1000 exposures of 10-60ms each. All of them should be put into a single rather large FITS file...
View ArticleMaxDome issues - by: lazjen
I'm running INDI on a Raspberry PI 2. I'm having a number of issues with the MaxDome driver operation. Occasionally the dome will just start rotating even though no other movement seems to have been...
View ArticleSbig STi issues - by: lazjen
I've got the Sbig Sti colour and I'm having some problems. I think some of these are known, but I'll raise them here. 1. Trying to capture an image never succeeds - it gets to "Prinary CCD readout in...
View ArticleDEC axis position relative to meridian - by: r00tk1d
Hi guys, I have a few nights of practice with Indilib/Ekos behind me and i'm very pleased. There are only a few things which I don’t understand. On of them is that in my case the meridian flip is not...
View ArticleCanon 1000D remaining time sub not working - by: r00tk1d
Hi guys, I'm using a Canon 1000D DSLR for my imaging. I noticed that when i choose longer sub, like 300 seconds, the remaining time isn't counting down. It just says 300 seconds until it is finished....
View ArticleClik here to view.
ZWO driver on Raspberry Pi - by: astroimagine
Hi there, I'm new to INDI I've successfully installed INDI library version 1.1.0 for Raspbian on the following page: indilib.org/download.html When I launch indiserver for my webcam and/or Canon DSLR...
View ArticleAstrometry solver fails.. - by: maxer
Hi everybody! I've just tried to resolve coordinates online several times now but get this.. 2015-12-13T18:57:48 Failed to retrieve job ID. 2015-12-13T18:57:48...
View ArticleClik here to view.
Indiserver time - by: r00tk1d
I noticed something strange in de Indiserver output:root@controller:~# indiserver indi_eqmod_telescope indi_sx_ccd indi_gphoto_ccd indi_watchdog 2015-12-13T19:17:42: startup: indiserver...
View ArticleClik here to view.
CDD simulator - by: broadcastyourseb
Hi, I'm using the CCD simulator and I find a bug in the focus process. All you need to reproduce it, is to select telescope and ccd simulator and take a frame in the focus windows. Then the horizontal...
View Article[SOLVED] Canon 1000D remaining time sub not working - by: r00tk1d
Hi guys, I'm using a Canon 1000D DSLR for my imaging. I noticed that when i choose longer sub, like 300 seconds, the remaining time isn't counting down. It just says 300 seconds until it is finished....
View ArticleMissing dependency RPI install - by: r00tk1d
Hi, Just wanted to note that there is one dependency missing in de Raspberry PI installation of the Indilib drivers with the lastest daily:dpkg: dependency problems prevent configuration of indi-gpsd:...
View ArticleDriver for older Orion Starshoot Deep Space Imager - by: jonkjon
I have an older Orion Deep Space Color Imager II lying around. I know the chip is the same as is in the Meade DSI II cameras. Does anyone know of any Linux drivers that might work with this beast? It...
View ArticleAuto focus with GPhoto CCD - by: jonkjon
I was just wondering if when using the GPhoto CCD remotely, should I change the image settings to a lower resolution temporarily? I have had the autofocus not quite reach focus a time or two (although...
View ArticleNew AZ-EQ5 - by: Entilza
Hello after reading about the indi project I was excited to give it a try, I am getting the following error with my AZ-EQ5. This is a new mount and even with EQMOD it needs custom advance settings for...
View ArticleEQMod alignment with Ekos Align module - by: knro
So today I encountered an issue with INDI EQMod driver while using Ekos Align module. EQMod was set to "Nearest Point" Alignment Mode and Ekos Align module initially worked after a few iterations to go...
View ArticleEnlarge the rang of aperture - by: max
Hi, I try to use a small len 100mm/f3.5 to guide my cannon 200mm/f2.8 Len , this would be a very small setup. But ekso keep saying it only accept aperture value start from 50, but my is 100/3.5=28.57,...
View ArticleATIK CCD short exposure - by: lemoult
Hello I and some other friends, we currently add a camera indiclient for the "audela" software. I have trouble with ATIK CCD. I failed to obtain exposure short than 3 seconds. The camera return a busy...
View ArticleMosaic.. - by: maxer
Hi all! I have quite small FOV with my new 200mm and even smaller with my old 300mm and sometimes I'd like to image a greater area without a lot of hassle calculating coordinates, so some kind of...
View ArticleEKOS sequences instantly going to status complete - by: dokeeffe
I'm probably doing something wrong here so apologies in advance. The first sequence run went good, the second one just instantly changed to 'complete' when I started the sequence. Here is what I did In...
View ArticleRPi Ekos Panel buttons have no icons? - by: lazjen
Some of the buttons in the Ekos panels have no icons, e.g. the Sequence queue buttons in the CCD & Filter Wheel panel. Another example is in the Object & Sequence Selection panel - most of the...
View Article