Clik here to view.
ATIK Titan + INDI + Kstars + Odroid C2 'wisdom' - by: NickK
I've worked with the Titan and other ATIK cameras quite a bit - in the past I've written drivers for it. I know a few people have had issues with the Titan and iNDI on the Odroid.. so here's the...
View ArticleClik here to view.
ASI-1600MM-Cool image download lockups - by: H__
My ASI-1600MM-Cool camera regularly locks up while downloading an image. The INDI control panel then shows a yellow expose light and ever changing remaining download times. syslog shows no camera...
View ArticleAtik 314L Connection Problem - Yellow Light - by: Graham
Hi, just joined the forum. Installed INDI this weekend via VirtualBox. Got my QHY5II guider and Xagyl filter wheel working fine, but my Atik 314L gives a Yellow light in the Control Panel when I try to...
View ArticleIndi and Raspberry pi 3 - by: Jasonmur
Hello all. Could anyone tell me if I need internet connection to use Ekos and Indi library? I only have internet access through my smart phone plan. I managed to ssh from my laptop, running Ekos...
View ArticleOdroid C1 - Ubuntu 16.04 LTS support - by: Gonzothegreat
If you own an Odroid C1 and was thinking of moving to a C2, I've just noticed now that Ubuntu 16.04 LTS is now supported on a C1. forum.odroid.com/viewtopic.php?f=112&t=22789 thought I would share...
View ArticleUSB Focus dispatch error - by: Adam
Hi, I am trying to set up a USB Focus v3 kit on a Raspberry Pi 2. Latest INDI with usbfocus 0.7 driver on the Pi and latest KStars from the PPA. When I connect to it from Ekos, all values are reported...
View ArticleIndi driver for DIY stepper-driven focuser - by: fm
Hi, I have built a diy stepper-motor driven focuser ; it is controlled through a python script running on a raspberry (script attached). Basically, it uses 4 arrow keys (up/down to set speed,...
View ArticleIndi and Raspberry pi 3 - by: Jasonmur
Hello all. Could anyone tell me if I need internet connection to use Ekos and Indi library? I only have internet access through my smart phone plan. I managed to ssh from my laptop, running Ekos...
View ArticleMoonlite focuser clone problem - by: jonel
I built the basic moonlite focuser clone following the information and arduino sketch presented earlier by PATDUT, ( TOPIC: Moonlite focuser protocol) using the stepper, and driver board he used along...
View Articlephoto - by: michele
Hello. I have two questions. I connected Synscan and the Nikon D5550. The mount works perfectly, but when I plug in my Nikon, I get the error (-53) that can not connect to the USB and asks me if Power...
View ArticleClik here to view.
Odroid C2 (64bit) + KStars + Ekos + INDI + ATIK cameras - by: NickK
I thought I'd just introduce my 'embedded' system - on the ODroid C2. I'm running a 64 bit build from the bleeding edge on Ubuntu using C2 + eMMC local storage. * Kstars * Ekos * astrometry.net + 32GB...
View ArticleEQMod tty read and write error - by: Adam
Hi, I encountered an issue when trying to connect an EQ6 (EQMod) to a Raspberry Pi (Raspbian) via a powered USB 2.0 hub. It works fine for some time but then suddenly gives these errors in the INDI...
View ArticleIndi Web Manager auto start problem - by: gmck
Hi, I have followed the instructions on the tutorial for installing Web Manager to the letter. If I start it manually using: cd servermanager python drivermanager.py It runs fine. If I setup the auto...
View ArticleClik here to view.
[resolved] ASI-1600MM-Cool image download lockups - by: H__
My ASI-1600MM-Cool camera regularly locks up while downloading an image. The INDI control panel then shows a yellow expose light and ever changing remaining download times. syslog shows no camera...
View ArticleAlignment with EQMod & Ekos - help needed - by: ollie
Hi everyone, I have spent several frustrating nights trying to get my mount to align properly and I think I need some help. After a couple of Captures & Solves, my mount (Factory-reset EQ8 with...
View ArticleSOLVED: ASIGetExpStatus failed (0). Restarting exposure... - by: dokeeffe
Having trouble with my ASI120MM tonight. Cant take any captures. See log below. Anyone any ideas? I've tried rebooting the machine. Unpluging usb etc etc... Thanks, Derek 2016-10-23T19:51:54:...
View ArticleIndi duino and sensors - by: Chris
Hello Guys I would preciate if someone could give me some clues about using sensors with indi duino driver. Currently I have successfully connected and used power relays but I am stuck at next step -...
View ArticleLocal download works, Client download does not - by: jonbelanger
I can capture exposures to the local (RPI3) store just fine, I can do multiple exposures with varying shutterspeeds and it all works great without delay. However, when I try to set it to "Client"...
View ArticleStoring guider frames? - by: NickK
OpenPHD2 can store guider frames (the raw FITS) for the entire run. Not many people use this perhaps, however I use it to create the point spread function for each long exposure frame. I've had a look...
View ArticleOrion Starshoot Autoguider - by: myxlflik
Hello all, I have started working with the indi/ekos/kstars setup on linux. I have been able to control two mounts and my canon DSLR, but am having issues with getting guiding to work with my Orion...
View Article