QSI Camera Not Connecting - by: JMac85
I have a QSI 683 Camera and I have the error message [ERROR] Error: put_Connected(true) failed.0x44d;Cannot open camera connection. Any ideas on what I can do to fix my issue??
View ArticleLack of indi-ssag - by: T-Studio
With 1.7.5 update indi - ssag becomes insufficient and indi - full can not be installed. sudo apt-get install indi-ssag sudo apt --fix-broken install sudo apt-get update && sudo apt-get...
View Articlehow to connect to mount and focuser with "real" serial ports? - by: airscott
I have a little industrial computer (running ubuntu 18.04) that I want to use with indi/kstars/ekos. The machine has two "real" serial (9-pin RS232) ports. I'd like to use the serial ports to control...
View ArticleEthernet connection to Rpi3 - by: wellchem
I am able to connect my Gemini 2 to my Rpi3 with manual addresses added. Pinging the Gemini returns a good connection. Trying to connect INDI drivers either under tcp at port 4030 or udp at 11110...
View ArticleM33 Halrgb - by: tseckler
M33 using William optics Star 71, Atlas AZ/EQ-G and Atik 383l+ . Processed with Astro Pixel Processor.
View ArticleNikon d3400 - by: etamburini
Goodmorning everyone! I would like to know if the nikon d3400 works with ekos and, if it works, what does it need? Emanuele
View ArticleScheduler not working anymore - by: wjdrijfhout
Yesterday I experienced an issue that I have not seen before. When I tried to start a run from the scheduler, it sorted the three jobs I had in it, but when it wanted to start executing, it aborted all...
View ArticleRosette in just Ha - by: PK
Last night we had a rare clear night, so I pulled the iOptron CEM25P onto the roof and captured the Rosette in Ha. Polar alignment was spot on (with no view of either pole at the equator) and tracking...
View ArticlePegasus FocusCube and Eqdir - just a heads up - by: wimvb
I recently bought a Pegasus Focuscube to replace my simple DC focus motor / Arduino homebuild. Installation went fine, and worked with the simulator telescope. But when I had the chance yesterday to...
View ArticleSynscan now does not track on Kstars after update - by: stash
Hi, After updating my RPI3 Ubuntu 16.04 (used as remote server) and PC running FED28/Kstars the Synscan telescope icon no longer moves when the telescope is slewed. Alt/AZ details change in Ekos ok .
View ArticleClik here to view.
Recent images with KStars/INDI, Raspberry Pi, and my Mac - by: rlancaste
These images include the Horsehead and Flame shot in red, green, and blue, 3 images at 5 minutes each. Also M33 with 6 red, 4 green, and 4 blue at 5 minutes each and the Veil Nebula with 10 Ha and 10...
View ArticleRPi3B_ZWOasiEFWmini_again - by: Tatsuji
My RasPi(Raspbian 9.4 (stretch)+livimdi 1.7.4) cannot communicate with ZWOASI EFWmini as follows. I have installed dependencies, sudo apt --fix-broken install, and cp udev rule based on ASI website....
View ArticleDark frame in internal ekod guiding - by: DrGkill
Dear, Is there any option somewhere to enhence dark libraries inside Ekos internal guiding ? At the moment it takes only one frame to apply dark substraction. It's not enough and make the image worst...
View ArticleDistributing the sequence of captures - by: mastria
In other softwares, i.e., ATIK Artemis, MaximDL, etc., there's an option to distribute the the captures sequence. For example, if I want to get 10 frames from RGBL and D(ark), I can get this like Ekos...
View ArticleDrivers dont load saved and/or default parameters at startup - by: mastria
I've been using several indi drivers, and noted that some of them don't load saved parameters on startup. I wrote a small python program that run just after drivers startup to "click" the LOAD button....
View ArticleEkos (correctly?) refuses to run Polar Align Assistant - by: astronomerc
Hello all, I realize that a minimum dimension must exist for the Polar Align assistant to run. The stated value when the message comes up that refuses to run the Polar Align Assistant, is that my field...
View ArticleClik here to view.
Another M33 (LRGB) - by: DerPit
My (second) try at M33. Had a try at automatic autofocus, but that only worked partially - have to play more with the setings. INDI and PHD2 are running on an ASRock Atom (my old video recording...
View ArticleD16429 - Testers needed for Scheduler changes - by: TallFurryMan
Hello fellow Ekos users, We would need a hand testing the rewrite of the Scheduler planning algorithm. Until it is merged, the changes are documented at phabricator.kde.org/D16429 . Please have a look...
View ArticleEqmod initial orientation - by: vnd
Hi, I am using eq6 mount with eqmod driver. My goal is to set up full remote control. As far as I understand, the driver does not know the absolute orientation, so the starting point is set from...
View ArticleOdd Scheduler loop - by: dokeeffe
Apologies if this is a bug that has already been fixed. I havent updated in a couple of months (generally I dont update unliess I'm at the observatory to verify all ok) So I was using the scheduler and...
View Article