Support for Takahashi Temma2M/2Z mounts? - by: Kenie
Hi, I’m considering to add Stellarmate or ZWO ASIAIR to my setup. My setup is Takahashi EM-11 Temma2M mount, BORG 107FL and Nikon D810a etc. I also want to buy an autoguide camera of either ZWO or...
View ArticleAutomatically create hotspot in Ubuntu MATE - by: simingx
Hi all, I installed the AstroPi3 build, and it seems to be working OK. How do I set up the Rpi so that it creates a hotspot if it does not connect to an access point (e.g. outdoors away from home)? The...
View Articleekos live site impersonating warning by safari - by: suvowner
safari is giving ekos live warning that website is not safe and may be compromised. the certificate is expired ???
View ArticleCanon 20D exposure time - by: Herrhausen
Hi, my 20D can't do exposures >30s anymore. When I attempt a 60s exposure the shutter closes after 30s. Then nothing happens for another 30s and after that the frame is downloaded and shown in...
View Articledefinitions of FITS headers DATAMIN and DATAMAX? - by: Doliometer
I don't understand how DATAMIN and DATAMAX in the FITS header are derived from the data. When I look at the data table in FV, all the entries are positive integers, but the header entries for DATAMIN...
View ArticlePegasus Focuscube has timeout errors - by: wimvb
I've run into problems with my Pegasus Focuscube. I can connect to it from Ekos (Windows, Indi on Rock64), but all I get is timeout errors after connecting. The focuser may get a temperature reading,...
View ArticleAvalon Driver Setup - by: Andyb7788
Hi everyone, I'm new to LInux, INDI, KStars and Ekos. I have an Avalon LInear mount with StarGO system. I've read the 'Avalon mzero Stargo with lx200 protocol' thread and would like to try the Avalon...
View Articlepolar alignment - by: viksmi
I have a CEM60 and Orion SSAG connected to INDI and using PHD2 guiding, when I start polar alignment - the mount goes below the horizon even though the polaris is within the FOV on my home position....
View ArticleClik here to view.
Just sharing a successful night - by: PK
Here in Kampala, on the Equator, it is rare to have nice clear skies at night. So when it happens randomly, I need to run up on the roof, set up my mount, and go through the long process of polar...
View ArticleSony A7III / A7RII, which driver? - by: simingx
Hi all, I'm trying to connect my Sony A7III (ILCE-7M3) and A7RII (ILCE-7RM2) to my Raspberry Pi, which driver in INDI should I select? It works (somewhat) with GPhoto CCD (but I couldn't get it to...
View ArticleOnstep works with serial but not Wifi connection - by: simingx
Hi there, I am running my Onstep controller (version 1.15g alpha) through a Raspberry Pi. When I connect to /dev/ttyACM0, the alignment, slewing etc works well. However if I connect through the Wifi,...
View ArticleRPI3 B running using Raspex O/S Ubuntu 18.10 based - by: stash
FYI :- As it s cloudy I have been playing with various O/S and have come across RASPEX which claims to run in 64bit on RPI3 B and RPI3 B+(not tried 64bit version yet) but does have so good features...
View Articleanyone used these guys - based world wide inc UK - by: stash
www.96boards.org Have Ubuntu 16.4 boards - even rock based chips - but decent hardware specs - USB3,Emmc etc
View ArticlePHD Guiding Setup Connection Problem - by: the.cakemaker
Hey guys! Wanted to try PHDGuiding tonight, via Remote Macbook. Set all up like in Jasems video. But i can not get a connection at all. The strange thing is, when i use my old profile WITHOUT PPHD,...
View ArticleMultiple telescopes connected - by: Astrosnoesky
Is it possible to connect more than one mount, telescope, camera etc to Ekos? If so can they all be operated simultaniously?
View ArticleBest internal guider settings? - by: the.cakemaker
Testing, Testing, Testing here, because of moon. i´d like all the KStars Users here to post there internal guider sessions, which work for them. Maybe we could get a trend for best guider settings this...
View ArticleUsing Temma 2 Driver for new coordinate - by: xuchang970621
We are sending commands to indiserver that is connected to Temma 2 telescope as a client. We are able to move and stop moving the telescope using the following commands: etc. for North, West, East But...
View ArticleStellarMate wont connect - by: suvowner
my StellarMate will no longer make a connection to my wifi network, and I can't see it in the list of wifi devices to connect to ?? any ideas, I tried restarting my apple router and no change.
View ArticleASI071MC PRO working correctly on Linux (raspberry PI 3 B+) ? - by: astropaul
Hi to all, I would like to purchase the ASI071MC PRO. I see from this site that this CCD should be works correctly with linux adding the correct PPA for firmware. I also see taht should be some issue...
View ArticleFocuser - by: etamburini
Good morning, it is possible to realize a focuser controlled in ekos with a nema 17 stepper motor, a board uno r3 and this motor shield?...
View Article