Unable to connect to QSI 690 from RPi3 - by: giorgio_ne
Hi Guys, I'm unable to connect my QSI 690 to INDI server running on a Raspberry Pi3 and a freshly installed copy of Ubuntu Mate 16-04. Here is the output of lsusb: Bus 001 Device 006: ID 0403:eb49...
View ArticleZWO 120MM Error (11) - by: Christian
hi, i just bought my new camera zwo asi 120MM. I plugged, she's recognized. But when i want in indi control panel use the streaming i've the error below : 2016-05-20T18:57:32: Error reading video data...
View ArticleRigelsys NStep focuser driver - by: polakovic
Hi, is there anybody who can test Rigelsys NStep focuser driver? Thank you, Peter
View ArticleClik here to view.
Astrometry.net performance results for Odroid C2 - by: NickK
I'm using a random (near the beehive) image from a 383L (5.45um pixels, 3362x2537 pixels 16bit = 17MB) to act as a performance test. The Pentax is a 4" refractor at 670mm native focal length giving a...
View ArticleIssues with lodestar X2 CCD - by: Dave
I've been having some issues with my Lodestar x2 CCD, when I open ekos in kstars I can connect to the mount and DSLR just fine but the CCD just hangs on an amber light. I can persuade it to connect by...
View ArticleSupport for BloomSky weather station - by: jrsphoto
I have a Bloomsky Weather station and I was wondering if support could be added to Indilib/Ekos for it. They are GIVING them away to those who would fill out a form here: community.bloomsky.com. Its...
View ArticleINDI GPhoto NG - New testing driver - by: GuLinux
Hi everyone, I had been rewriting the old gphoto ccd driver, and I think it's currently ready for public testing. You can find the driver and instructions for compilation here:...
View ArticleClik here to view.
INDI Server for Windows - by: polakovic
wINDI became INDI Server for Windows (similarly to INDI Server for OSX). Not just because of marketing reasons, but also because of windi virus and a stupid antivirus protection on some operating...
View ArticleCelestron slew rate selection with Joystick - by: Gorgias
Hello, I am controlling my Celestron Nextar 8SE mount with a joystick. I know that in the Telescope simulator for example, it is possible to set the slew rate, to park/unpark the mount or abort the...
View ArticlePatch: Change slewpreset with gamepad buttons - by: pch
Hi, I am using indi_eqmod on a Rpi2 to control my HEQ5 and I occasionally connect a gamepad to move the telescope. I find it very difficult to change the slewpreset with a joystick, despite a careful...
View ArticlePi 3 no does not start Indi - by: ggkids
Hello, i installed kstars-bleedind and Ekos in a Raspberry Pi 3 by official repository. When I try to start indi in Simulators profile does not happen anything at all: "Connect" button never gets...
View ArticleMissing 3rd party drivers in Ekos VM? - by: Gorgias
Hello, I have the Ekos VM 1.5.0 (Kubuntu 16.04). I know that a newer version 1.5.1 is available, but it takes time to install the astrometry.net data and other stuff I have installed, so I prefer to...
View ArticleCan't find indi-full in repository - by: Vox45
Hello all! I decided to move away from windows so I have downloaded Mint Linux and followed the instruction to add Ubuntu repository All want well but this line: sudo apt-get install indi-full I get...
View Article[SOLVED] Celestron slew rate with Joystick - by: Gorgias
Hello, I am controlling my Celestron Nextar 8SE mount with a joystick. I know that in the Telescope simulator for example, it is possible to set the slew rate, to park/unpark the mount or abort the...
View Article[SOLVED] Unable to connect to QSI 690 from RPi3 - by: giorgio_ne
Success! I was able to take pictures at various exposure lengths:) The rig is now ready for a trial under a the stars. Thanks a lot for all your help with the qsi driver!! Giorgio
View ArticleServos in Indiduino - by: Gorgias
Hello, I needed to control servomotors from INDI (plugged on an Arduino connected to my Raspberry Pi), and I noticed that Indiduino does not support them, whereas Firmata already has those...
View ArticleASI120MM Hangs capturing 16bit - by: nmac
Hi! When capturing 16bit Mode (actually 12) my ASI120MM hangs forever and never downloads the image in long exposure. Anybody suffering from this issue? I have to disconnect the camera and reload...
View ArticleRegress to QHY driver 1.5 on the Pi for the SSAG? - by: garthb
Hello, I'm exploring whether I can use INDI server on my Pi and for the most part, everything seems great! The part that doesn't work as well is my SSAG. Judging from other research I've done on the...
View ArticleCanon DSLR Mirror Lock - by: mathieu
Hi all, total noob here. I installed Ekos yesterday and I'm sure I'll love it once I become familiar enough to appreciate it. I've somehow managed to shoot a couple of test frames with my Canon 550D...
View ArticleINDI libqsiapi coexists with native libqsiapi? - by: anat
Hello I am using a QSI683 camera and want to use both GoQat and INDI for controlling the camera. For GoQat: I install the binary libftd2xx from FTDI and compile libqsiapi using ./configure...
View Article